HEAVY-DUTY ELECTRIC DRILL UNIT ALLOWS FOR MORE WORK ON PART IN A SINGLE HANDLING
Messer offers their heavy-duty electric drill unit for the TMC4500 ST. An optional drill feature can be combined with normal plasma and oxyfuel cutting, allowing for more work to be done on the piece part in a single handling. All processes are done in the same set-up, providing accurate, feature-to-feature relationships, both within a single piece and from part to part.
Posted: April 9, 2009
Messer offers their heavy-duty electric drill unit for the TMC4500 ST. An optional drill feature can be combined with normal plasma and oxyfuel cutting, allowing for more work to be done on the piece part in a single handling. All processes are done in the same set-up, providing accurate, feature-to-feature relationships, both within a single piece and from part to part.
? Drills up to 2 in diameter with 17 hp
? Mist coolant through the tool is provided for reliable and easy drilling (flood coolant also available).
? The 4 in drill stroke is feed-rate controlled to provide reliable drilling while minimizing tool breakage.
? CAT 40 taper spindle
? Optional automatic tool exchange
? Optional 12 Tool Storage
The drill unit can be activated using a CNC command in the part program or by the operator with a manual switch. After activation, pneumatic cylinders keep a hold down clamp in place as it pushes down on the plate prior to and during the entire drilling cycle. The tool cutting speed, feed per revolution length are maintained in the database.
Subscribe to learn the latest in manufacturing.
