DOWN TO THE CORE
Jet engines run at increasingly higher temperatures to attain greater fuel efficiencies. They must be cooled with more intricate cooling schemes that require the casting of complex cooling passages. MTC Certech introduces a fused silica ceramic core that is ideal for the airfoil casting of blades and vanes for rotating and static parts in these engines.
Posted: August 1, 2009
To attain greater fuel efficiencies, jet engines are running at increasingly higher temperatures and must be cooled with more intricate cooling schemes that require the casting of complex cooling passages. Stronger metal alloys are also being used in the casting process, which means a core material must be able to withstand the extremely high temperatures used to pour them.
Morgan Technical Ceramics Certech (MTC Certech; Fairfield, NJ), a leader in the investment casting industry, has introduced its advanced P52 core material that is used for producing ceramic cores that remain extremely stable with the high temperature super alloys now being used to cast quieter and more fuel-efficient jet engines. The fused silica ceramic cores are ideal in the airfoil casting of blades and vanes for rotating and static parts of these engines.
P52 core material stays rigid, maintaining extremely tight, consistent wall tolerances. Large volumes of dimensionally accurate parts can be produced on a timely basis. Holding thinner metal walls more accurately results in higher casting yields, reduced scrap rates and lower casting costs.
Another advantage of the P52 core?s stability is that manufacturers can reduce or eliminate the use of costly platinum pins to hold the ceramic in place and support the core during the casting process. This results in additional cost savings.
While dimensionally strong, P52 core material also exhibits improved crushability during solidification. This means that it remains rigid and stable through the cooling process but is crushable when it needs to be during the metal solidification process. This is particularly useful for alloys that are prone to hot-tearing (as found in equiax castings) or re-crystallization (castings that are involved in directionally solidified or single crystal castings).
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Morgan Technical Ceramics, 26 Madison Road, Fairfield, NJ 07004, 800-433-0638, Fax: 973-227-7135, www.morgantechnicalceramics.com
.
Subscribe to learn the latest in manufacturing.
