MODULAR ADVANCED FORMING SYSTEM IMPROVES PART QUALITY AND JOB VERSATILTY FOR METALFORMERS
The Di-Dro Advanced Forming hydraulic pressure system from Hyson Products uses high force in areas where space is limited in both upper and lower operations for job versatility, with low contact and delayed return forces that improve part quality and increase the life of the press.
Posted: October 11, 2011
This hydraulic pressure system uses high force in areas where space is limited in both upper and lower operations for job versatility, with low contact and delayed return forces that improve part quality and increase the life of the press.
Hyson Products (Brecksville, OH), a business of Barnes Group, Inc., released its modular Di-Dro Advanced Forming System. This hydraulic pressure system enables metalformers to use high force in areas where space is limited. Applicable in both upper and lower operations for job versatility, its low contact and delayed return forces improve part quality and increase the life of the press.
The modular Di-Dro system is retrofitable in nearly any system with up to six corrosion-resistant cylinders in individual bases hosed to a control center. There are four cylinder models providing contact forces from 1780 N to 125,440 N and stroke lengths from 13 mm to 225mm. Each has been engineered with a bore seal that resists contamination and leakage as well as a self-aligning piston rod to accommodate die movement and sideload.
Hyson Products provides solutions for metal stampers with a broad array of products from advanced engineered systems, including press cushions and manifolds to the Tanker® line of high performance gas springs, from the Dyne-A-Cam® Series of cams to pad delay systems, all manufactured in a LEAN, ISO 9001-2000 certified facility. www.hysonproducts.com
Subscribe to learn the latest in manufacturing.
