Home / Air-Powered Pneumatic Saw and Clamp Assembly Cuts Steel Plates with Ease

Air-Powered Pneumatic Saw and Clamp Assembly Cuts Steel Plates with Ease

The APS-438 Air-Powered Saw and Quick-Clamp lets workers take the saw to the steel plate rather than transporting the plate to a large table saw and can produce square cuts with no HAZ.

Posted: October 16, 2013

ESCO Tool’s (Holliston, Massachusetts) pneumatic saw and quick-clamp assembly that lets users cut steel plate up to 2 in thick and 15 ft wide anywhere there is a 90 psi compressed air supply is available.

The APS-438 Air-Powered Saw and Quick-Clamp lets workers take the saw to the steel plate rather than transporting the plate to a large table saw and can produce square cuts with no HAZ. Featuring a 2 in W steel track with two wedge-style clamps for attaching to the plate, the pneumatic saw mounts on a bracket that glides along the track using four V-grooved steel wheels.

Providing a cut line indicator gauge to simplify setup and alignment, the Quick-Clamp’s track comes in 5 to 15 ft sections and ESCO’s APS-438 Air-Powered Saw is powered by a 3 HP motor. Designed for maximum rigidity, it square-cuts steel plate up to 2 in thick using fiberglass reinforced blades and is also ideally suited for cutting boiler tube panels up to 4 in thick.

ESCO’s APS-438 Air-Powered Saw and Quick-Clamp sell for $5,795.00 (list) and are available for rent in the continental USA.

www.escotool.com

Subscribe to learn the latest in manufacturing.

Calendar & Events
Southeast Design – 2-Part Show
September 11 - 12, 2013
Greenville, SC
Mid-Atlantic Design – 2-Part Show
September 25 - 26, 2013
Phoenixville, PA
CMTS of Canada
September 30 - October 3, 2013
Mississauga, Canada
Wisconsin Manufacturing and Technology Show
October 8 - 10, 2013
Wisconsin State Fair Park Exposition Center Halls B&C
DISCOVER 2013
October 8 - 16, 2013
Florence, KY
WESTEC 2013
October 15 - 17, 2013
Los Angeles, CA
SOUTH-TEC
October 29 - 31, 2013
Greenville, SC
New England Design-2-Part Show
October 30 - 31, 2013
Marlborough, MA
DMG / Mori Seiki Manufacturing Days
November 12 - 15, 2013
Mori Seiki Manufacturing – Davis, CA
FABTECH
November 18 - 21, 2013
McCormick Place – Chicago, IL
Midwest Design-2-Part Show
November 20 - 21, 2013
Northern Kentucky Convention Center – Covington, KY
PCD Tool Manufacturing
November 20, 2013
United Grinding North America – Fredricksburg, VA