Simplify and Optimize Hardfacing and Build-up Welding Applications
This new line of horizontal and vertical welding lathes features PLC-based controls that are ideal for remanufacturing slab caster rolls, shell rolls, zinc pot rolls, mandrel bars and more.
Posted: December 3, 2014
Mavrix Welding Automation Inc. (New Berlin, WI) has launched a new line of horizontal and vertical welding lathes featuring PLC-based controls. The straightforward terminology of the PLC significantly reduces the learning curve, so operators are ready to weld in minutes. With adaptive spindle speed compensation, operators do not need to adjust wire-feed speed or spindle speed to accommodate any change in diameter. Further, dual-axis step allows for any combination of surface angle.
This multi-process horizontal lathe is capable of sub arc, open arc and gas-shielded welding processes using a single torch. An onboard second torch is ready for quick changeover for ID bore welding down to 4 in ID. Target customers include those who remanufacture slab caster rolls, shell rolls, zinc pot rolls and mandrel bars, as well as other roll options.
The highly flexible system permits the operator to develop programs by simply defining which axis will step or run when welding begins. Complementing the PLC is a 12 in color HMI (human machine interface) and easy-to-use open-naming convention for part configuration storage.
This multi-process welding lathe is preconfigured for a wide variety of accessories: servo oscillator, water cooler with loss of flow sensing, pressurized flux delivery and recover and exhaust system integration. The onboard gravity flow flux hopper includes an ultra-sonic level sensor to help reduce air consumption, inform the operator when the system is low on flux and reduce the chance of flux jams within the delivery hose. Mavrix custom builds most lathe products to fit a customer’s specific product mix.
Core components in the PLC-based welding lathe have been used for 30 years on Mavrix’ portable circuit board-based, fixed automation line of products. A reliable product has been made smarter by integrating encoders and the PLC to regulate speeds and motion in a closed-loop method, as well as adding the part configuration storage. The added intelligence enables the system to keep the operator informed but not bothered by error messaging.
Since 1986 Mavrix has been a leading specialty manufacturer of automated hard facing and metal build up systems used to resurface equipment in the recycling, pulverizing, grinding, crushing, steel mill, oil and gas, and custom welding automation applications.
Subscribe to learn the latest in manufacturing.
