Heavy-Duty Magnetic Drill is Easily Portable to Jobsite
The compact, lightweight MABasic 450 drill from CS Unitec is an ideal hole-cutting solution for steel fabricators, contractors and maintenance operations.
Posted: July 3, 2016
The MABasic 450 professional-grade, two-speed portable magnetic drill from CS Unitec, Inc. (Norwalk, CT) cuts holes up to 1-5/8 in diameter with annular cutters in structural steel and other metals. This heavy-duty workhorse has a 10.5 amp/110 V double-insulated motor and a no-load speed of 250 rpm and 450 rpm. With the included 3/4 in geared chuck, this mag drill easily converts to a standard drill press with a 6-1/3 in stroke for conventional twist drilling up to 3/4 in diameter. Compact (14-1/4 in tall) and lightweight (29 lb), this drill is easily portable to the jobsite, making it the ideal hole-cutting solution for steel fabricators and contractors, as well as for plant maintenance operations.
https://youtu.be/95fpJOSW9Cg
The drill is equipped with an internal lubrication system that increases the life of annular cutters by reducing friction and wear. The Electronic Safety Shutoff Sensor automatically shuts down the drill if the magnet loses contact with the material, protecting both operator and equipment. The machine’s magnet has a holding strength of 3,080 lb.
CS Unitec, Inc., 22 Harbor Avenue, Norwalk, CT 06850, 203-853-9522, info@csunitec.com, www.csunitec.com.
Subscribe to learn the latest in manufacturing.
