Pipe Fabrication Tools for Boiler Tubes, Steam Turbines and More

A bolt seat resurfacing tool that makes sure turbine cover bolts fit properly after repairs and is suitable for all surfaces subjected to corrosion is offered by ESCO Tool Company (Holliston, MA): the MILLHOG® BSR Tool features a cutting head that is equipped with three flat-face blades to cleanly remove corrosion and resurface turbine shell diaphragm retainer bolt holes. Capable of 0.001 in flatness accuracy, this tool can remove metal up to 1.5 in deep and be equipped with different sized heads to fit the hole and circumference that requires resurfacing. Fully portable to provide a fast and accurate way to resurface multiple retainer bolt holes without cutting fluids, the MILLHOG BSR Tool uses TiN coated blades in a secure blade lock system and has a robust gear drive that is field-proven in numerous beveling and pipe machining applications. It is offered in pneumatic, electric, and battery powered configurations. This tool is priced from $4,995 and is offered in a wide range of sizes. Pricing is available upon request.

An electric portable pipe machining tool that is a powerful alternative to pneumatic tools for end prepping boiler tubes and other pipe fabrication work is also offered by ESCO Tool: the MILLHOG Mini Electric Pipe Beveling Tool rigidly mounts to the tube or pipe ID and is suited for end prepping heavy-wall stainless steel pipe and other highly alloyed metals when compressed air is not available. Featuring a high torque variable speed motor that spins at 19 rpm to 66 rpm, it is ideal for beveling hard and soft boiler tubes and pipes from 1.25 in ID to 6.625 in OD and pulls a thick chip without needing cutting oils. Capable of performing any angle of prep, including compound bevels and J-preps, this tool utilizes the proven EscoLock cutter blade holding system. Designed for repetitive end preps, it has a heavy duty gear drive and all clamping components are heat treated, including the draw rod. The MILLHOG Mini Series ID Clamping End Prep Tool sells for $6,595 and is available for rent.

ESCO Tool also offers a full line of pneumatic rolling motors and tube expanders for straight-, flare-, long-reach, and beaded rolls that prevent over and under. MILLHOG Rolling Motors and Tube Expanders are air-powered and enable users to create a uniform and tight mechanical seal on all types of rolls. Featuring a torque control setting that stalls the tool when it reaches the desired tube expansion, they are supplied as complete kits with a choice of tube expanders for straight-, flare-, long-reach, and beaded rolls. Available with hundreds of tube expander variations for tubes from 3/8 in to 4½ in OD and tube sheets to 5-3/8 in, these tube expanders are easy to adjust and allow precise torque control from 25 ft-lb to 325 ft-lb. Available with 90 rpm, 190 rpm, and 280 rpm motors, these right-angle tools are supplied complete and ready to use with standard shop air. They are offered for sale from $4,695 or for rent, with 24-hour shipment available.

ESCO Tool Company, 75 October Hill Road, Holliston, MA 01746, 800-343-6926, Fax: 508-429-2811, matt@escotool.com, www.escotool.com.