Home / High Temperature Horizontal Air Flow Cabinet Oven

High Temperature Horizontal Air Flow Cabinet Oven

The No. 1045 oven from Grieve safely reaches 1,250 deg F for heat treating, with inner and outer door gaskets, inner gasket seals directly against the door plug and outer gasket seals directly against the front face of the oven.

Posted: August 13, 2018

The Greive 1045 high temperature horizontal air flow cabinet oven has workspace dimensions of 38 in W x 38 in D x 38 in H and uses a 350,000 Btu/hr modulating natural gas burner with a 2,000 CFM, 2 hp recirculating blower for horizontal airflow. This oven features 12 in thick insulated walls comprised of 2 in of 2,300 deg F ceramic blanket and 10 in of 10 lb/cf density rockwool, along with an aluminized steel exterior, 16 ga stainless steel interior and a 325 CFM-powered forced exhauster.

No. 1045 is a 1,250 deg F (677 deg C) high temperature horizontal air flow cabinet oven from The Grieve Corporation (Round Lake, IL) that is currently used for heat treating at a customer facility. Workspace dimensions of this oven measure 38 in W x 38 in D x 38 in H. It uses a 350,000 Btu/hr modulating natural gas burner with a 2,000 CFM, 2 hp recirculating blower provides horizontal airflow. This oven features 12 in thick insulated walls comprised of 2 in of 2,300 deg F ceramic blanket and 10 in of 10 lb/cf density rockwool, along with an aluminized steel exterior, 16 ga stainless steel interior and a 325 CFM-powered forced exhauster. Additional features include inner and outer door gaskets, inner gasket seals directly against door plug and outer gasket seals directly against front face of oven, plus all safety equipment required by IRI, FM and National Fire Protection Association Standard 86 for gas-heated equipment. Controls on the No. 1045 include a digital indicating temperature controller.

The Grieve Corporation, 500 Hart Road, Round Lake, IL 60073-2835, 847-546-8225, Fax: 847-546-9210, sales@grievecorp.comwww.grievecorp.com

Subscribe to learn the latest in manufacturing.

Calendar & Events
Southeast Design – 2-Part Show
September 11 - 12, 2013
Greenville, SC
Mid-Atlantic Design – 2-Part Show
September 25 - 26, 2013
Phoenixville, PA
CMTS of Canada
September 30 - October 3, 2013
Mississauga, Canada
DISCOVER 2013
October 8 - 16, 2013
Florence, KY
Wisconsin Manufacturing and Technology Show
October 8 - 10, 2013
Wisconsin State Fair Park Exposition Center Halls B&C
WESTEC 2013
October 15 - 17, 2013
Los Angeles, CA
SOUTH-TEC
October 29 - 31, 2013
Greenville, SC
New England Design-2-Part Show
October 30 - 31, 2013
Marlborough, MA
DMG / Mori Seiki Manufacturing Days
November 12 - 15, 2013
Mori Seiki Manufacturing – Davis, CA
FABTECH
November 18 - 21, 2013
McCormick Place – Chicago, IL
Midwest Design-2-Part Show
November 20 - 21, 2013
Northern Kentucky Convention Center – Covington, KY
PCD Tool Manufacturing
November 20, 2013
United Grinding North America – Fredricksburg, VA