High Speed Mag Drill Increases Tool Life for Carbide Cutters
Carbide tooling is more effective at drilling holes when turned at a higher rpm – and the HMD906 portable high speed magnetic drill from Hougen does exactly that: its high torque, high rpm, two-speed motor cuts holes more efficiently with carbide than standard mag drills.
Posted: December 4, 2018
Hougen Manufacturing, Inc. (Swartz Creek, MI) has released the HMD906, a new portable high speed magnetic drill designed to take full advantage of carbide annular cutters. Carbide tooling is more effective at drilling holes when turned at a higher rpm – and that’s exactly what the HMD906 does with its high torque, high rpm motor: it cuts holes more efficiently with carbide than standard mag drills. The HMD906 is available with one of two different arbor configurations. The new arbor uses the tool-less quick change system for rapidly switching out different sizes of cutters that utilize the Fusion2™ or one-touch shank. The second arbor takes advantage of more tool life using the rigid two flat cutter mounting system. Powering the drill is a proprietary two-speed motor. The two speeds help maximize tool life and increases torque when using larger diameter cutters. The addition of a two-stage magnet increases magnetic holding power by 30 percent when the drill motor is turned on to save energy and increase magnet life.
Many additional features make this drill easier to use: an integrated coolant bottle which is conveniently located and does not add to the width of the drill, a more robust housing design with an ergonomic carrying handle, a spot to hold the hex wrench, reversible feed handles and a D-ring on the back of the magnet for quickly attaching the safety chain. This drill also includes positive slug ejection and a carrying case. A swivel base magnet is also available for added versatility. The HMD906 weighs only 35 lb, measures 22-13/16 in H x 7-11/16 in W x 11-3/4 in long and provides drilling capacities from 7/16 in up to 2 in (12 mm to 50 mm) diameter and 2 in (50 mm) depth of cut. The drill has an electrical rating of 10A and 350/650 RPM motor.
For safety the HMD906 incorporates exclusive features to insure a safe work environment, including a no-adjustment safety switch that shuts down the drill motor if lift of the magnetic base is detected, plus an LED indicator that monitors this sensor and alerts if an unsafe operational condition exists. A two-stage power on switch prevents drill rotation unless the magnet has first been engaged and, in the case of a power interruption, safety circuitry will keep the drill motor off after power is restored until the start button is manually depressed. The HMD906 is made in U.S.
Hougen Manufacturing Inc., 3001 Hougen Drive, Swartz Creek, MI 48473-7935, 810-635-7111, www.hougen.com.
Subscribe to learn the latest in manufacturing.
