Versatile Heat Treating Systems Handle Diverse Applications
Continuous and controlled environments for the heating of metals ensure consistency and high-quality treatments and solutions.
Posted: January 24, 2024
The design, adaptability and flexibility of the equipment are important in carrying out the efficient delivery of various heat treatment processes.
New Infrared Conveyor Ovens up to 78” Wide
The new EconoRed™ Series VI conveyor ovens from Vastex Industrial (Bethlehem, PA) are available in 30”, 54”, and 78” (76, 137 and 198 cm) widths, and are equipped with six infrared heaters in a single chamber for rapid curing, drying or preheating of parts, laminates and coatings.
Model ER-VI-30 offers a 30” (76 cm) wide conveyor belt and 15,600 watts of power ― model ER-VI-54, a 54” (137 cm) belt and 31,200 watts. Model ER-VI-78 with 46,800 watts and a 78” (198 cm) wide belt can accommodate large parts, sheet and film products in single or multiple rows.
All models include a digital PID temperature controller accurate to +/- 1°F (+/-0.5°C), and an exhaust system that removes fumes and moisture while cooling the chamber’s outer skin for operator safety.
The 13.25’ (404 cm) long conveyor belt runs true by means of a low friction belt aligner patented by the company, with digital belt speed controls allowing infinitely adjustable dwell times to suit process requirements. Capacity (belt speed) can be doubled or tripled as new or when needs increase by adding one or two modular heating chambers and extending the conveyor belt, increasing throughput in direct proportion to each additional chamber.
Heaters come with a 15-year warranty and are height adjustable from 2”-to-7”(5 to 17.7 cm) to accommodate parts as well as sheet products. A Teflon®-coated fiberglass belt is standard, with optional Kevlar® and stainless steel mesh belts available for high-heat and/or sanitary applications.
Powerful, Portable and Easy Mounting/Dismounting Induction Heater
BEGA International B.V. (Bethpage, NY) introduces a portable multi-purpose induction heater on the North American market. The MF Quick-Heater 3.0-3.5 kW can be used for mounting, dismounting and pre-heating purposes. The new model is part of the MF Quick-Heater 3.0 series, varying from 10 kW to 44 kW capacity. Weighing less than 8 kg and fitting in a small carrying case, this easy-to-use but powerful tool is just plugged into the mains 230 V. It can be used in difficult circumstances where other systems are impossible to operate, for instance where there is little space to work in or where no open fire is permitted. The heater’s flexible inductors are ideal for a large variety of parts with a maximum diameter of 120 mm. Application examples can be found in all types of industries.
The heater combines a small generator with a flexible inductor that can be wrapped in or around a workpiece or both, offering a multifunctional solution for various shapes or sizes. The inductors can be used for parts with a maximum diameter of 120 mm and are suitable to heat to a maximum temperature of 180 °C or 356 °F. The parts are heated either extremely fast or controlled, depending on the application and purpose of dismounting, mounting or pre-heating. The heater has four different heating modes. Two temperature sensors make it possible to measure the internal and external temperature of a workpiece. When this Delta-T function is enabled, the maximum preset temperature difference between two points can never be exceeded. Smart electronics take care of optimal operation frequency. The heating process is displayed in a 4.3” touchscreen. A log function can save or export data via the USB connection.
