Metal Forming & Fabricating
Filter by Process Zone:
Hypertherm Introduces New Corporate Venture Capital Arm
Hypertherm Ventures seeks partnerships to commercialize advanced manufacturing technology in strategic interest areas.
New Hampshire Honors Hypertherm
Barbara Couch of their HOPE Foundation receives the Work-Based Learning Award for helping to promote work-based learning across the state.
Racine Metal-Fab Celebrates Milestone
They are celebrating 50 years of success in the sheet metal fabrication business.
Beckhoff Expands Operations
The new Carlsbad office near San Diego extends their reach of sales, support and training.
Advanced Systems for Medical Device Manufacturing
The TruLaser Cell 3000 5-axis laser machine from TRUMPF quickly and easily switches between fine cutting with up to 8 kW of solid-state laser power, precision welding with a wire feeder, or laser metal deposition for cladding or adding volume and structures to small or medium-sized 2D or 3D components.
CO2 Lenses and Mirrors for Precision Laser Engraving of Medical and Dental Instruments
CO2 Precision Marking Lenses from Laser Research Optics come in 0.5 in to 1.5 in sizes with focal lengths from 1 in to 25 in at 0.5 in increments with < 0.2 percent total absorption values to keep them cooler.
Vacuum Heat Treating System for Manufacturing Surgical Components
The TITAN H2 vacuum heat treating system with 2-bar gas quenching from Ipsen has an 18 in x 24 in x 18 in all-metal hot zone with a 1,000 lb load capacity and can operate at temperatures from 1,000 deg F to 2,400 deg with ±10 deg F uniformity.
Redefining Digital Dentistry with Enhanced Patient Care
Using the NextDent 5100 3D printer powered by Figure 4 technology from 3D Systems, dental labs and clinics can produce dental devices up to 4X faster while reducing material waste, capital equipment expenditure, and reliance upon milling centers.
Jenoptik Appoints New Director
Robin Swain is now the senior director of their Silicon Valley Application Center.
Egar Tool & Die Installs New Lube Application Systems
The high-pressure Spra-Rite systems from Industrial Innovations are used in their stamping and drawing operations.
Hybrid Additive Manufacturing of Dissolvable Metal Components for Medical Implants
UNL is using a LENS 860 Hybrid Controlled Atmosphere system from Optomec for high quality additive and subtractive processing of magnesium to develop dissolvable components for next-generation medical implants.
New Engineering Manager at Coldwater Machine
Gordon Mattix now leads their engineering operations.
