Stamping Presses
Filter by Process Zone:
Beckwood Press Expands Engineering Capabilities
They add five engineers and one drafter to meet the exceedingly sophisticated demands of their evolving customer base.
Beckwood Press to Relocate Headquarters
The new 55,000 sq ft state-of-the-art facility will be less than one mile north of their current location.
U.S. Steel and Kobe Steel Invest in Advanced High-Strength Steel Capabilities
They are spending $400 million on a new continuous galvanizing line at PRO-TEC Coating Company, their joint venture in Ohio.
Deep Draw Hydraulic Press System Run by Robots
To perform the multiple operations required to produce a heavy duty high pressure cylinder tank, a 750 ton deep draw hydraulic press from Greenerd Press uses a double-moving platen that is fully integrated with two 6-Axis FANUC robots that load/unload parts and prompt the press to cycle for operations.
Virtual Press Design Technology Takes Center Stage
Using virtual press design technology via a user-friendly interface, customers can work with Beckwood Press engineers to input a variety of variables (bed size, tonnage, speed, heat parameters, etc.) and generate a preliminary sketch of new machinery that meets their specific application requirements.
Greenerd Partners with FANUC as Tier 1 Authorized Robot System Integrator
To provide advanced automation systems in short time frames, Greenerd now has full access to all FANUC Robot models, training and support.
Miro Manufacturing Invests in Servo Press Technology
They purchase a Komatsu H2W300 330 ton servo press with a CWP ServoMax 36 in feed line for stamping operations.
Kistler Acquires Vester Elektronik
This deal allows Kistler to specialize in premium optoelectronic sensors for control and process monitoring in metal stamping and forming operations.
Union Tool Adds Another Fourth Generation Member
Nick Simpson joins the company with a focus on sales.
U.S. Machine Tool Orders Accelerate
June manufacturing technology orders climbed 6.5 percent over May to $373.2 million.
Press Feed Equipment Minimizes Material Scrap
The Zig-Zag servo feed from Dallas Industries has a one, two or three-out capacity with the servo feed index cycle made simultaneously with the cross-slide lateral travel, producing a diagonal stock movement in the automatic mode that minimizes the scrap generated when stamping out circles. The manual mode has forward or reverse indexing and cross-travel indexing.
Servo Presses for Near-Net-Shape Fine Blanking, HSLA Blanking, High Productivity
Versatile DSF Series Servo Presses from AIDA-America can improve virtually any stamping operation through increased productivity, improved part quality, increased die life and reduced maintenance.
